Lilac Glitter HTV

Blade: Standard
Setting: Iron-on+

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

• Set iron dial between Cotton and Linen
• Cover design with Kraft Paper or Teflon Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15-20 seconds
• If areas of design lift after application, replace cover sheet and re-press for 10 seconds
• Peel carrier warm

• Cover design with Kraft Paper or Teflon sheet
• Preheat garment for 2-3 seconds
• Apply design at 320F/160C
• Use medium pressure for 15-20 seconds
• Peel carrier warm